The Liner Breaking Kit is designed for the professional sweep who installs stainless liners.
Where before you may have had to break into a chimney breast to remove the existing clay liner prior to installing the new flue, the Rodtech tile breaking system, is designed to eliminate this necessity.
The system comprises of two different size tile breakers, so that you may break out liners with a range from 6 inches up to 10 inches. 10 meters (32') of high strength rods are included
Drill drivers for top down or bottom up rod use.
Chain tar remover which can remove glazed creosote.
Rod bag to keep the whole kit in safely.
| Item Name |
RRP Each |
Quantity |
| Rodtech Click 1000 x 18mm Rod |
$59.00 |
10 |
| Rodtech Click Chain Tar Remover |
$90.00 |
1 |
| Rodtech Click 4x6 Large Clay Liner Remover |
$57.00 |
1 |
| Rodtech Click 4x4 Small Clay Liner Remover |
$54.00 |
1 |
| Rodtech Click Standard Drill Adapter (with button) |
$33.75 |
1 |
| Rodtech Click Drill Adapter (without button) |
$26.25 |
1 |
| Rod Bag |
$58.50 |
1 |
The liners will be broken into manageable pieces. It has been reported to us by a few liner installers that a job, that they have quoted 2 ½ days to remove a liner has been removed fully within 2.5-4 hours, making the system increasingly desirable. You must read the manual before using this equipment, and should a liner have been fully cemented in then you may still have to break into the chimney breast but that will be very limited in our experience. Our rods and products are the toughest in the market, and every measure has been used to make sure of this fact, however due to the forces exerted, you may find a rod snap occasionally, and in using this system for breaking liners all warranty are void. You will have to use a suitable cordless drill with a safety clutch, and further it is advised that you bring the drill down in speed and not just stop!
See our video of a round flue tile, untouched by the BTBK style breaker it breaks apart nicely with the 4x4 breaker.
